MDG ATMOSPHERE APS Series Guide de l'utilisateur télécharger pdf (Page 8)

ATMOSPHERE

APS

& MAX

APS

Series

User Guide120815, Rev: A/c 8 / 15

SETTING UP

WARNING:

 Do not operate at less than 2 meters (6.5 ft.) from people.

The MDG ATMOSPHERE

APS

Series requires 1 m (3.28 ft) of clearance below the fan.

 Never install above people.

 When not in use ALWAYS switch OFF the power switch located on the back panel, or

unplug the generator.

 Install the Fog Generator away from rain, wind, heavy dust or any harsh environment

situations.

 These Fog Generators must be installed in an upright position on a stable and level

surface.

 Ensure available space for all electrical cable and gas tubing runs,

 Use in a well ventilated area.

The MDG Generators are quite easy to operate and require no preventive maintenance.

 Fill the reservoir with MDG Neutral Fog Fluid (see FILLING THE FLUID RESERVOIR

paragraph).

 Connect the power cord 115 or 230 VAC, 50-60 Hz (see Table for Wattage)

 Connect the gas inlet to a gas bottle equipped with a single or double stage regulator.

The gas inlet is an Oxygen Adaptor (9/16-18 R.H).

 Open the gas bottle, and set the regulator to the operating pressure. The maximum

operating pressure is defined as below:

 ATMOSPHERE

APS

138 kPa / 1.38 bar / 20 psi,

 ATMOSPHERE

APS

H.O. / TOURING 207 kPa / 2.07 bar / 30 psi,

 MAX 3000

APS

& MAX 5000

APS

276 kPa / 2.76 bar / 40 psi,

 MAX 5000

APS

H.O. / TOURING 414 kPa / 4.14 bar / 60 psi,

 Switch ON the main Power switch.

 Press the Power switch on the remote control, a red LED will turn on. Then a yellow

LED will turn ON indicating “HEAT ON”.

 Wait 8 to 10 minutes until the green Ready LED turns ON.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

MDG ATMOSPHERE APS Series Guide de l'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Machine à brouillard MDG ATMOSPHERE APS Series